| Model | D-50 | D-50S | D-100 | D-100S |
| Range | 50mm | 100mm | ||
| Resolution | 0.005mm (0.01mm) |
0.001mm | 0.005mm (0.01mm) |
0.001mm |
| Accuracy (excluding quantized error) |
0.01mm | 0.004mm | 0.01mm | 0.005mm |
| Measuring force | Less than 3.0N | Less than 3.5N | ||
| Cable length | 2m | |||
| Mounting method | Ø20mm stem or fastening by M4 screws at two positions | |||
| Contact point | M2.5 × 0.45 Sø 2.4mm steel | |||
| Operating temperature | 0 - 40℃ | |||
| Weight | 450g | 520g | ||
| Output signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) | |||
| Suitable counter | C-500/C-700 | |||
| C-5 Discontinued (Only stock is supplied) |
C-5S Discontinued (Only stock is supplied) |
C-5 Discontinued (Only stock is supplied) |
C-5S Discontinued (Only stock is supplied) | |
| CP-5 Discontinued |
CP-5S Discontinued |
CP-5 Discontinued |
CP-5S Discontinued | |
| Accessories | * Finger lever for lifting spindle ---- 1 pc | |||
| Featuares | * If Spindle inner spring is removed, measuring force will be that of spindle itself (only when in upright position) * D-50, D-50S ---- 1.0N (100gf) D-100, D-100S ---- 1.0N (110gf) * Recommended stand is PDS-2 | |||
| Options | * Level mounting clamp (GB-50) * Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. | |||
