Model | D-10 | D-10S | D-20 | D-20S |
Range | 10mm | 20mm | ||
Resolution | 0.005mm (0.01mm) |
0.001mm | 0.005mm (0.01mm) |
0.001mm |
Accuracy (excluding quantized error) |
0.005mm | 0.002mm | 0.005mm | 0.003mm |
Measuring force | Less than 1.0N | Less than 1.5N | ||
Cable length | 2m | |||
Mounting method | ø 8mm stem or 6.5mm hole on lug back | |||
Contact point | M2.5 × 0.45 Sø 2.4mm cooper (X-2) | |||
Operating temperature | 0 - 40ºC | |||
Weight | 220g | 300g | ||
Output Signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) | |||
Compatible standard counters |
C-500/C-700 CM-5B | |||
C-5 Discontinued (Only stock is supplied) |
C-5S Discontinued (Only stock is supplied) |
C-5 Discontinued (Only stock is supplied) |
C-5S Discontinued (Only stock is supplied) | |
CP-5 Discontinued |
CP-5S Discontinued |
CP-5 Discontinued |
CP-5S Discontinued | |
Options | * Release (RE-4) Lifting lever (LL-1) * Dust proof rubber (BG-10) * Flat back (GB3-D1O), screws (S-110) * Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. |
* Release (RE-4) * Flat back (GB3-D20) * Customer must specify if application is ap-side-down. The measuring force changes when the gauge is inverted. |
Dimensions (D-20/D-20S/D-20N)